Two Different Jobs, One Decision
The Kicker CXA8001 and AudioControl EPICFOUR are both solid amplifiers, but they solve different problems. The CXA8001 is a mono subwoofer amplifier built to drive a single sub or a pair of subs. The EPICFOUR is a 4-channel amplifier that can power four speakers or be bridged to run a sub and a pair of speakers. Choosing between them starts with what you need to power, not just which amp has more impressive numbers.
If you already have a subwoofer and need dedicated bass power, the CXA8001 is the direct choice. If you are building a full system or want the flexibility to power both speakers and a sub from one compact amp, the EPICFOUR deserves a closer look.
Key Specs at a Glance
- Kicker CXA8001 CX Series Subwoofer Amplifier: Kicker CXA8001 CX Series Subwoofer Amplifier is a mono Class-D amp with variable KickEQ bass boost (0-6dB @40Hz), a variable low-pass crossover (50Hz–200Hz, 12dB/octave), and a 24dB/octave subsonic filter at 25Hz. These controls let you tune bass response and protect your sub from damaging low frequencies, which is essential for a subwoofer amp.

Kicker CXA8001 CX Series Subwoofer Amplifier - AudioControl EPICFOUR EPIC Series 4-Channel Amplifier: AudioControl EPICFOUR EPIC Series 4-Channel Amplifier is a compact Class-D amp rated 4 x 100 Watts @ 4 ohms, 4 x 200 Watts @ 2 ohms, and 2 x 400 Watts @ 4 ohms bridged. It includes 12dB/octave Linkwitz-Riley variable high-pass filters and a remote level control. The high-pass filters and remote level control make it versatile for powering full-range speakers or a bridged subwoofer with tuning flexibility.

AudioControl EPICFOUR EPIC Series 4-Channel Amplifier
Kicker CXA8001 vs AudioControl EPICFOUR: What Each Excels At
- Subwoofer power and wiring flexibility: The CXA8001 is one-ohm stable, which gives you more wiring options for a single sub. It accepts up to 40 volts of speaker-level input, so it can work with many factory radios without a line-out converter. Its subsonic filter helps protect your sub from frequencies that can cause damage.
- Multi-channel flexibility: The EPICFOUR can power four speakers at 4 or 2 ohms, or be bridged to deliver 2 x 400 Watts @ 4 ohms. Its high-pass filters let you run component speakers cleanly, and the included remote level control makes it easy to adjust volume from the front seat.
- Physical size and installation: The CXA8001 has a small footprint for easier installation, and includes vertical mounting hardware. The EPICFOUR is also compact at 6.1" W x 5.9" L x 2.01" H, making it a good fit for tight spaces. Both are Class-D designs, which helps with thermal efficiency.
- System expansion: The CXA8001 has full-range outputs so you can add another amp later. The EPICFOUR can be bridged to run a sub and still have two channels left for speakers, which is a more complete solution in one box.
What the Specs Don't Tell You
The supplied information confirms power ratings and features, but it does not include measured performance data like dynamic headroom or real-world efficiency under load. Both amps are Class-D, so they should run cooler than many traditional amps, but the actual thermal performance depends on your vehicle, ventilation, and how hard you drive them.
For the CXA8001, the catalog notes a three-second turn-on/off delay to eliminate unwanted interference. That is a practical detail you will appreciate in a real install. For the EPICFOUR, the smart auto-reset protection circuit is a useful safety feature, but the catalog does not specify exactly which conditions trigger a reset.
Neither amp's catalog lists a specific recommended fuse size for the CXA8001, while the EPICFOUR recommends an 80 Amp fuse. Always follow the manufacturer's instructions for wiring and fusing, and check your vehicle's electrical system before installation.
Which Should You Choose?
- Choose the Kicker CXA8001 if...: Your primary goal is dedicated subwoofer power. You want a mono amp that is one-ohm stable, accepts high-level inputs up to 40 volts, and includes a subsonic filter. The CXA8001's small footprint and vertical mounting hardware make it easy to place near your sub enclosure.
- Choose the AudioControl EPICFOUR if...: You need to power multiple speakers or want the flexibility to run a bridged sub and still have channels left for mids and highs. The included remote level control and high-pass filters make it a strong choice for a complete system in a compact amp.
- What about running both?: A common setup is to use the EPICFOUR for your main speakers and the CXA8001 for your sub. The EPICFOUR's high-pass filters clean up the signal to your mids, while the CXA8001 handles bass with its own crossover and subsonic filter. This gives you dedicated power for each job.
Final Thoughts
The right amplifier is the one that matches your system's needs. The Kicker CXA8001 is a purpose-built subwoofer amp with wiring flexibility and bass controls. The AudioControl EPICFOUR is a versatile 4-channel amp that can power a full system or be bridged for a sub. Look at your current speakers, sub, and head unit, then choose the amp that fits the job.
If you are still unsure, consider how you want to expand later. The CXA8001's full-range outputs make it easy to add another amp. The EPICFOUR's bridged mode gives you a two-in-one solution. Both are solid choices from reputable brands, so the decision comes down to your specific setup.



