One Amp, Two Very Different Jobs
The Audison AV 5.1K and Alpine S2-A60M are not direct substitutes. The Audison is a five-channel amplifier designed to power an entire system—front speakers, rear speakers, and a subwoofer—from one chassis. The Alpine is a mono amplifier built specifically for subwoofers. Your choice depends on whether you need to replace a single amp or simplify a whole-system build.
Below, we break down the supplied specifications and explain which scenarios each amplifier suits, so you can decide based on your system rather than marketing claims.
Audison AV 5.1K: Five Channels, Hybrid Design
- Audison AV 5.1K Voce Series 5-Channel Amplifier: Hybrid design with two 75 W A-Class channels, two 250 W AB-Class channels, and one 1000 W D-Class channel (RMS). This channel mix lets you run an active two-way front stage (75 W each) plus rear fill or bridged midbass (250 W each) and a dedicated subwoofer (1000 W).

Audison AV 5.1K Voce Series 5-Channel Amplifier - Audison AV 5.1K Voce Series 5-Channel Amplifier: Total power RMS: 1650 W. This is the sum of all channels, not a single-channel rating. It indicates the amp can drive a complete system without additional amplifiers.
- Audison AV 5.1K Voce Series 5-Channel Amplifier: Input sensitivity Pre-In: 0.3 ÷ 5 V RMS; Speaker-In: 1.4 ÷ 24 V RMS. The wide speaker-level input range allows integration with factory head units that output higher voltage signals.
- Audison AV 5.1K Voce Series 5-Channel Amplifier: Digital Input: No. The AV 5.1K accepts only analog inputs as supplied. A digital input board is mentioned as an optional replacement (AV bit IN), but it is not included.
Alpine S2-A60M: Mono Power for Subwoofers
- Alpine S2-A60M S-Series Hi-Res Subwoofer Amplifier: Power output: 330W RMS x 1 @ 4Ω, 600W RMS x 1 @ 2Ω, 600W RMS x 1 @ 1Ω. This mono amp is designed for subwoofer duty. The 2Ω and 1Ω ratings let you extract full power from a single subwoofer or a pair wired to a low impedance load.

Alpine S2-A60M S-Series Hi-Res Subwoofer Amplifier - Alpine S2-A60M S-Series Hi-Res Subwoofer Amplifier: Frequency Response: 10Hz – 400Hz. The limited bandwidth is appropriate for subwoofers; it is not intended to drive full-range speakers.
- Alpine S2-A60M S-Series Hi-Res Subwoofer Amplifier: Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately). If you want dash-mounted bass control, you'll need to budget for the additional accessory.
- Alpine S2-A60M S-Series Hi-Res Subwoofer Amplifier: Dimensions: 8.7” W x 2.25” H x 8.25” D; Weight: 4 lbs, 13 oz. The compact footprint makes it easier to fit under a seat or in a shallow location compared to the larger Audison.
Channel Count and Power: What Each Amp Can Drive
The most obvious difference is channel count. The Audison AV 5.1K provides five discrete channels, while the Alpine S2-A60M provides one. That single channel on the Alpine is optimized for low-frequency output, whereas the Audison's channels are split across different amplifier classes to serve specific roles.
- Audison AV 5.1K: Five channels: two 75 W (A-Class), two 250 W (AB-Class), one 1000 W (D-Class). Use it for a full active front stage plus sub, or front/rear plus sub.
- Alpine S2-A60M: One channel: 330 W @ 4Ω, 600 W @ 2Ω or 1Ω. Use it exclusively for a subwoofer; it cannot power door speakers.
System Fit: When the Audison Makes Sense
Choose the Audison AV 5.1K if you want to power an entire system from one amplifier. Its five channels cover front speakers, rear speakers, and a subwoofer, or you can run an active two-way front stage plus a sub. The A-Class channels are intended for tweeters or midranges where low distortion is a priority, while the D-Class channel provides ample subwoofer power.
Keep in mind that the AV 5.1K is a substantial unit: it measures 470 mm (A) x 399 mm (B) x 220 mm (C) and weighs 7.2 kg. Plan for a mounting location with enough space and ventilation. Also note that it requires a 100 A fuse and supports 11 ÷ 15 VDC supply voltage.
System Fit: When the Alpine Makes Sense
Choose the Alpine S2-A60M if you already have a head unit or another amplifier powering your speakers and you only need subwoofer power. Its mono design and compact size make it a straightforward addition to a factory or aftermarket system. The selectable remote turn-on circuit helps with integration into newer vehicles, and the side-mounted controls are easier to reach when the amp is installed under a seat.
The S2-A60M does not include a remote bass knob; you'll need the optional RUX-KNOB.2 or RUX-H01 if you want on-the-fly bass adjustment. Its frequency response tops out at 400 Hz, so it should not be used for midrange or full-range speakers.
What the Specs Don't Tell You
Neither product record includes listening impressions, measured distortion at all power levels, or long-term reliability data. The Audison lists THD figures for its channels (0.05% for A/B channels, 0.3% for the sub channel at 100 Hz, 4Ω, 70% rated power), while the Alpine lists a single THD+N figure (<0.1% at 14.4V). These are useful but do not guarantee audible differences in your vehicle.
Also, the Audison's digital input is not included; the record mentions an optional AV bit IN board but does not provide its price or availability. If you need digital input, factor that into your decision. The Alpine's birth sheet certifies actual power output, which is a nice assurance, but it does not substitute for proper system tuning.
Making the Choice
If you are building a system from scratch or want to simplify an existing multi-amp setup, the Audison AV 5.1K offers five channels and flexible power distribution in one chassis. If you only need to add bass to a system that already has speaker amplification, the Alpine S2-A60M is a compact, purpose-built mono amp that will likely cost less and take up less space.
Consider your speakers' power handling and impedance next. The Audison's 75 W channels suit efficient tweeters and midranges, while its 250 W channels can drive more demanding components. The Alpine's 600 W output at 2Ω or 1Ω will suit subwoofers that can handle that power. Match the amp to your speakers rather than choosing based on brand alone.



