Car Audio and Tint | Car Toys | Washington, Texas, Colorado ...

Pioneer GM-DX971 Subwoofer Amplifier

Pioneer GM-DX971 Subwoofer Amplifier - Main image
$314.9 $470 In stock

Category: Amplifier

Pioneer GM-DX971 Subwoofer Amplifier

Turn Up the Bass
This amplifier features a wired bass control remote for optimal bass level adjustment according to your listening preferences and the characteristics of the music.

Big Power-Small Size
Pioneer’s extra-efficient Class-D amplifiers mark a dramatic improvement in power output capability, yet are 50% smaller than the current GM-Series Class-AB amplifiers. That makes them more versatile in terms of installation as well as performance.

Packs a Punch
This mono amplifier is rated at a total of 2400 watts (max power) with high-current circuitry that provides all the power you need, delivering 500 watts RMS at 4 ohms, 800 watts RMS at 2 ohms, and up to 1200 watts RMS at 1 ohm. Stable, durable circuitry reduces the risk of high input power, allowing the unit to achieve a 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to the system.

Automatic Signal sensing and Turn-On
When used with an audio source such as an OEM source or a receiver without RCA output, the amplifier will activate as soon as an audio source is detected through the speaker level outputs. When using a pre-amplified source (RCA), this Pioneer amplifier will use the signal (+12Vdc) from the "Remote" input for activation.

High-Quality Affordable Design
To prevent poor bass performance in demanding situations, such as heavy bass content or dynamic range music, Pioneer designed a high-quality power supply to sustain constant power requirements. This design enhances audio performance by providing a better signal-to-noise ratio, improved audio dynamics, sustained bass when needed, and, most importantly, a more enjoyable ride in your car!

Gold Plated Terminals
These terminals provide the ability to maintain an accurate signal with increased electrical conductivity, prevent corrosion and provide enhanced durability with excellent resistance against wear.

Pioneer’s TVC (Total Vibration Control)
Pioneer's TVC (Total Vibration Control) concept used in this amplifier not only increases the rigidity of the unit but also counteracts vibrations that affect sound quality at various points. The fixing points of the main board are optimized to completely suppress external vibrations and small vibrations caused by circuit parts. It adopts a heat sink structure that optimizes the position of large components, mounting screws, heat dissipation, and mechanical vibration suppression.

Protection Control System (PCS)
Pioneer’s PCS continuously monitors the input voltage, current consumption, and operating temperature to automatically adjust the amplifier’s output, ensuring operational stability during long listening sessions or when installed in high-temperature environments.

Independent Variable Filters
The amplifier features a variable high-pass filter (HPF) and a variable low-pass filter (LPF) ranging from 40 Hz to 500 Hz to precisely adjust the audio bandwidth and optimize the acoustic performance of your speakers and/or subwoofer. Additionally, to give you even more control, these filters are completely independent for channel "A," channel "B," and the subwoofer output (SW).

Specifications

Amp Features
Bass Boost Remote: Yes
Class: D
Grounding System: Negative
High Quality Audio Components: Yes
Power Source: 14.4V (10.8 V to 15.1 V allowable)
Protection Control system: Yes
Terminal Type: Block
Unit Weight: 6.8 lbs

Product Performance
Allowable Load Impedance: 1 ohm to 8 ohm allowable
Avg Current Consumption (Amps X #Ch): 3.5 A x 1-Channel - 4 Ohm
7.5 A x 1-Channel - 1 Ohm
5.1 A x 1-Channel - 2 Ohm
Bass Boost: 50 Hz - Frequency
Continuous-Power-Output:
500 W x 1-Channel - 4 Ohm
1200 W x 1-Channel - 1 Ohm
800 W x 1-Channel - 2 Ohm
Crossover Network Subwoofer Channel: LPF - 40Hz-240Hz
Crossover Network Subwoofer Slope: -12 dB/oct
Frequency Response - Sub Channel: 10 Hz to 240 Hz
Fuse Rating: 40A x 3
Maximum Power Output:
1000 W x 1-Channel (4 Ohm)
2400 W x 1-Channel (1 ohm)
Rca Inputs: 1-Channel (Mono)
Speaker Line Input Sensor: Yes
Thd - Subwoofer: =/< 1% ( 20 Hz to 240 Hz)

Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.4 / 5 · 5 reviews)

George ★★★★★

The wired bass knob is the best part of this thing—I mounted it under the dash so I can dial the low end in and out depending on what I'm listening to. Turned the gain down to match my sub and it hits clean with zero distortion.

Emma ★★★★★

Installed this to push a single 12 in my trunk and it genuinely woke the sub up. The wired bass control remote is nice because I can dial the low end back on podcasts without touching the head unit. Runs cool even after an hour of loud driving.

Abigail ★★★★★

The wired bass knob is the best part, I can dial in the low end from the driver's seat without touching my head unit settings. Running it on a single 12 in a sealed box and it hits way harder than the old amp it replaced. No clipping even when I push it, which is exactly what I wanted.