Compustar RFP2WG18F 2-Way Remote Start: Remotes Only Setup

By Car Audio and Tint | Car Toys | Washington, Texas, Colorado ... | Published: 2026-10-25

Category: How-to Guides

Learn how to pair and set up the Compustar RFP2WG18F 2-way remote start remotes with your existing system, including common pitfalls to avoid.

Quick answer

Pairing the Compustar RFP2WG18F remotes is straightforward if your vehicle already has a compatible Compustar remote start or security system. The key is entering programming mode correctly and syncing each remote one at a time.

Before You Start: Compatibility Check

The Compustar RFP2WG18F is a remotes-only kit, meaning it does not include a control module. It works exclusively with existing Compustar remote start and security systems that support the 2-way PRO G18 remote. If your vehicle does not already have a compatible Compustar brain unit, these remotes will not function.

Check your existing system's model number or consult the installation manual to confirm compatibility. Common compatible modules include the CM-Series and CM-T Series control units.

What's in the Box

The kit includes two 2-way PRO G18 remotes. No control module, wiring harness, or antenna is included. You will need access to your vehicle's valet/programming button (usually located under the dash) to enter programming mode.

Step-by-Step Remote Pairing

Step 1: Enter Programming Mode: Turn the ignition to the ON position (engine off). Within 5 seconds, press and hold the valet/programming button until you hear one long chirp from the siren (or see the LED flash steadily). Release the button. You are now in remote programming mode. Common mistake: Pressing the valet button too quickly or for too short a time. Wait for the full chirp before releasing.
Step 2: Pair the First Remote: On the first remote, press and hold the Lock and Unlock buttons simultaneously for 2 seconds. The siren will chirp once (or LED will flash) to confirm the remote is learned. If you do not get a confirmation, release and try again. If no confirmation after three attempts, exit programming mode (turn ignition off) and start over. Battery orientation in the remote can cause pairing failure.
Step 3: Pair the Second Remote: Immediately after the first remote is learned, repeat the same button press on the second remote. The system will chirp once to confirm. Do not wait longer than 10 seconds between remotes or the system may exit programming mode. Both remotes must be paired in the same session. If you exit programming mode, you will need to re-pair both remotes again.
Step 4: Exit Programming Mode: Turn the ignition to the OFF position. The siren will chirp twice (or LED will turn off) to confirm you have exited programming mode. Test both remotes by pressing Lock and Unlock to verify operation. If only one remote works, you likely exited programming mode before pairing the second. Repeat all steps from Step 1.

Product Details

Compustar RFP2WG18F 2-Way Remote Start - Remotes Only: The Compustar RFP2WG18F is a smartphone-controlled 2-way remote start kit with a 3000-ft max range and water-resistant design. It includes two 2-way remotes and is backed by a 3-Year PRO Warranty. The 3000-ft range gives you reliable start from a distance, and the water-resistant body means the remote can handle everyday weather without failing.
Compustar RFP2WG18F 2-Way Remote Start - Remotes Only